Popular Posts

Friday, 6 September 2013

Integration of Distributed Generating Units into Distribution Networks

Abstract- 

This paper discusses the technical aspects of distributed generation (DG) unit’s integration into distribution systems. The paper objectives are: selection of the site and size of DG unit/s to be investigated to the system and to check the system performance as follows: reduce the power losses, increase the stability limit as well as improve the protection devices settings. A matlab simulink model of the system is done at different operating conditions to check the feasibility of DG units'
implementation into distribution systems. Simulation results based on one real power distributor system of Egyptian network of voltage level 11 kV are efficiently presented.







2 comments:

  1. Dear sir,

    Dear Mr B.Karthik Patnaik,

    My name's Henry/ Vietnam,

    During the simulation, i faced many drawbacks to make the battery charge/discharge. Even though, i tried to refer to your article for further information.

    Due to limited knowledge, therefore, i can't solve the persist problem on my simulation.

    Actually, my thesis is solve the matter on controlling system frequency by battery connecting to Wind Turbine.

    Hence, please kindly help on this matter.

    Do you have any simulink file (soft file) regarding to "controlling system frequency by battery connecting to Wind Turbine" ? or simulink file on the article?

    Please kindly give your mail address that i can send you the simulink file/articles for further information.

    Thanks so much with deeply.

    Best regards.
    -------------------------------------------------------------------
    Henry (Mr.)
    Phone : +84-919943537
    Email : tl.cuongmaster@gmail.com;
    lecuongegn@gmail.com

    ReplyDelete
  2. Well, if possible, please kindly reply my comment on my mail :lecuongegn@gmail.com

    Thanks so much.

    ReplyDelete